185gsm lyocell linen placement print, by piece

$25.65 - $45.45
Write a Review
Width:
1.47m (slight variation as some selvedges have been trimmed)
Weight:
185gsm
Stretch:
Nil
Defect:
2.5m piece is discounted as the very top 26cm has some double-printing.
Adding to cart… The item has been added

Lyocell (a.k.a. tencel)/ linen blend fabric featuring a print of painted birds and plants in warm vermilion red and various shades of green, on a light warm apricot base. It is a placement print (see dimensions in last photo), each pattern repeat has two mirrored panel designs.  It is a directional print meant to be cut with the grain.  Fabric has only about 15% linen content, so it feels more like tencel than linen - extremely smooth, soft and slightly cool to the touch. Fabric has a fine slubby appearance from the linen content and slight body, with very good drape. Just slightly translucent. Suitable for clothing such as tops, blouses, shirts, tunic tops and dresses (sample photos here and here).

Sold by the piece, as the fabric was pre-cut when it came to me. No single piece has a complete placement, as the top 1-2cm is always cut off for some reason. Please see the details of each piece below, with reference to the last photo above which shows the print dimensions:-

>1.68m length
From the top, there is almost an entire placement print (top 1-2cm is cut off), followed by a standard gap of ~6cm, and then ~38cm of the top of the next placement print.

 

(Pieces below are sold)

>2.5m length 
From the top, there is almost an entire placement print (top 1-2cm is cut off) (of which just the very top 26cm is double-printed), followed by a standard gap, and then ~1.25m of the next placement print (i.e. almost 100%). 

>1.38m length
From the top, there is almost an entire placement print (top 1-2cm is cut off), followed by a standard gap of ~6cm, and then just a little bit of the top of the next placement print.

>2.35m length
From the top, there is almost an entire placement print (top 1-2cm is cut off), followed by a standard gap, and then ~1.06m of the next placement print (i.e. >80%).